Product benefits:
Excellent anti-slip properties.
Contains Crumb Rubber for a unique, “Soft feel”
Instant safety to any floor, ramp, steps etc.
Outstanding durability.
Chemical resistant.
Simple to apply on a wide range of surfaces.
Recommended for use on:
Walk-ways Fire escapes Horse boxes Wheel chair ramps
Flat bed trucks Stable floors Shower rooms Swimming pool surrounds
Boat decks Jetty Inflatable dinghy’s Rubber pontoons
Factory floors Tail lifts Scaffolding Play ground equipment
What you are buying:
Contains Rubber Crumbs to give a soft textured finish.
This Crumb Rubber gives a, “Soft feel” to the dry paint film.
This, “Soft feel” provides outstanding grip and anti-slip properties.
This paint is flexible enough to give a smooth ride to fork lift trucks, pallet barrows etc in commercial and industrial environments.
Highly recommended for use with horses & livestock etc because the, “Soft feel” gives instant confidence to the animal on slippery or sloping surfaces and it is non-abrasive.
It is waterproof, totally flexible and chemical resistant.
1) How to prepare:
This is a professional quality products and for the best results it is important to use the correct preparation for different substrates.
Aluminium:
Lightly abrade the surface.
Apply an Etch Primer prior to applying the paint.
Concrete:
For new concrete etch prior to painting.
Old concrete that is clean and dry will not require etching.
Fibre glass:
Abrade the surface to remove all glossiness.
Clean with Pre-Wipe KPT00 prior to painting.
Ferrous metal:
Un-primed: Lightly abrade the surface prior to painting.
Primed: Adheres well to primed metal.
Galvanised: Etch Primer required prior to applying the paint.
Non ferrous metal:
Lightly abrade the surface prior to painting.
Apply an Etch Primer prior to the paint.
Plastic:
Lightly abrade the surface.
Apply a Primer for Plastic prior to the paint.
Rubber:
Abrade the surface.
Clean with Pre-Wipe KPT00 prior to painting.
Timber:
If the surface is smooth, abrade the surface prior to painting.
2) How to apply:
For the best results apply two coats.
By brush:
a) Apply a generous coat onto the surface.
b) Avoid over brushing as this will cause bald patches.
c) When the first coat is touch dry, apply the second coat at 90 degrees to the first coat.
By roller:
a) Use an open foam stipple roller.
b) Apply a generous even coat when touch dry, apply the second coat at 90 degrees to the first coat.
Size & coverage: 5 Litres which will cover 20 to 24 square metres with one coat.
Colours: Black, Grey, Dark Green and Brown.
How to order:
1) Order the quantity of tins you require via the listing.
If you require help deciding:
a) Which is the best prepartion for you.
b) Which products you need
c) How much you need.
Please send me details of the size of the area you need to paint and what it is made of.
We will email a list of what you need and, "Step by step" instuctions of how to achive the best result.
